An optical narrow bandpass filter is an optical device that allows light of a very narrow range of specific wavelengths to pass through while absorbing or reflecting all other wavelength ranges. It is a special type of bandpass filter. Narrow band filters use the interference phenomenon of light to selectively transmit or reflect light within a specific wavelength range. The principle is based on the interference and absorption characteristics of light. By adjusting the phase difference of the multilayer coating structure, only light within the target wavelength range is selectively transmitted, while light of other wavelengths is blocked or reflected. Specifically, narrow band filters are usually composed of multiple layers of thin films, and the refractive index and thickness of each layer are optimized according to design requirements. By controlling the thickness and refractive index between film layers, the phase difference of light can be adjusted to achieve interference effects within a specific wavelength range. When incident light passes through a narrow band filter, most of the light is reflected or absorbed, and only light within a specific wavelength range is transmitted. This is because of the multilayer coating structure of the filter; light of specific wavelengths generates a phase difference, and interference causes the light of these wavelengths to be enhanced, while light of other wavelengths undergoes phase cancellation and is reflected or absorbed.